Tag Archives: waddington replacement

New Manual

A new non-contacting loop control as revolutionary as the Coiltek® CS-5000 V2 deserves an updated, easy-to-use manual. And our customers deserve to have it instantly at their fingertips. That’s why our brand new, full-color manual is available both in a free physical copy with your new Coiltek® loop control, and instantly online as a printable PDF.

In the manual we discuss topics such as setting-up your unit, both manually and with a USB connected laptop, diagrams for wiring, inputs, and terminals, notes on software, and much more. To check out the new updated manual for the Coiltek® CS-5000 V2, click here.

For more information on any topic related to any of our quality, American-made ultrasonic, non-contacting loop controls, contact us.

Coming Soon: Fail-Safe Loop Controls

Coiltek has been creating ultrasonic loop control systems for over 30 years, and we have continued to update and innovate within this niche. Even with all of our efforts to create a reliable product, sometimes things still go wrong. Up till now, without a backup, that meant a down line until a replacement could be obtained.

Not anymore. Soon we will be introducing a product with two kinds of loop controls integrated into a single system, which we create a self-regulating, fail-safe device to keep a line up-and-running even when one half of the system is down.

Stay tuned for more details about this exciting new development!

Setting up Your Coiltek® Loop Control

With the advent of the new CB-5501M mainboard, the manual set up procedure for setting your unit’s control range has changed, we think for the better. Instead of a cumbersome process involving dip switches, the new manual set up process is as simple as pressing three buttons and is virtually instantaneous.

Simply press the set-up button to begin the process, then set your near and far range by pushing the buttons. That’s it. If you’d like to ensure that your set up remains unchanged, simply remove the W1 jumper, which disallows re-programming.

For more information on setting up your no-contact loop control unit, please refer to the Unit Set-Up page of our website. For more information, please contact us.

Replacement Parts from Coiltek®

A line is a big investment, and when it goes down, you loose money. That’s why we strive to make products that stand the test of time. Many of our boards have lasted in the field for over 15 years. In fact we have seen many boards sent in for repair that are over 20 years old, and many of those can actually be repaired.

For those times when a repair just isn’t fast enough, we also supply replacement boards. We keep all of our boards and cables in stock at all times so that we can get you up and running again ASAP.

We also design all our equipment to be backwards compatible. That means that even if your loop control is 20 years old, if the stand is still in tact, you can just replace the boards with our new CB-5501M control board and CB-5101R-1 ranging card, and bring your unit back to life.

If you have any questions about replacement boards or repairs, or to request an RMA number for your repair, please contact us. For more info on Coiltek, our high-quality, American made loop control systems, check out our main site.

Coiltek® Downloads Page

We get a lot of phone calls requesting new copies of manuals and enquiring as to where our signature software can be obtained. Both of these items, and much more, including brochures and trouble-shooting materials, can be downloaded for free from our website on our Downloads page.

If you need any further information, have a question, or a new application, let us know by contacting us.

Coming Soon: Resource Content

Here at Coiltek®, we are always trying to make life easier for our customers. To that end, we are working to create content that allows our customers to easily and quickly find information pertinent to the issues they face regularly.

If you have a question or application that you would like us to explore in this series, please contact us. As always, more information about our quality, US-made loop control systems can be found at coiltek.com.

Where to Buy Your Next Coiltek® Loop Control

We here at Coiltek® have been extremely fortunate to work with some of the best OEMs and distributors in the industry. Our non-contact loop controls are integrated into large-scale industrial systems spanning several industries, as a result of these partnerships. In fact, you can find Coiltek® no-touch loop control equipment on lines all over the world, thanks to these groups.

If you need a new no-touch loop control system, or a brand new line, consider doing so through one of our partners, such as Coe Press Equipment, Press Room Equipment, Formtek, or Motion Industries.

If you have any questions about our industry standard no-touch loop controls or how to get one, please feel free to contact us.

Introducing the new CS-6200 no-touch loop control

Our popular Coiltek CS-6100 line of non-contact loop controls has finally become obsolete, but don’t fret; we have a new low cost, highly reliable, American-made no-touch loop control system to take its place.

Introducing the new CS-6200 ultrasonic loop control system from Coiltek. This exciting new product line features much of the same technology found in our industry standard CS-5000 V2 line of non-contacting loop controls, and has many of the same capabilities: Instant push-button calibration, on-board storage for up to 8 programs, and optional remote access to up to 3 preset programs, plus much more!

If you would like more information about this product line and it’s uses, such as in the plastic tubing industry, please check out our brochure. If you have further questions or would like up-to-date pricing, please contact us

Two of our all new CS-6200 ultrasonic loop controls systems, side by side.

Two of our all new CS-6200 ultrasonic loop controls systems, side by side.

.

CS-5000-72xx

Our best selling product, the CS-5000-72xx is the industry standard in non-contacting loop controls. And it’s not hard to see why. With an outstanding list of features and unrivaled ability for customization, not to mention a full line of useful accessories and free lifetime over-the-phone customer support, the CS-5000 series of no-touch loop controls is the gold standard.

Each CS-5000 is a custom build, with customers first choosing their stand height (15″, 54″, 72″, or 84″), with our 72″ stands being the most popular (hence the 72 in the part number mentioned earlier in this post). Customers then choose a boom length, which replaces the xx in the part number. With a wide range of boom lengths between 11″ and 48″, customers can order exactly what they need.

The new CS-5000 series of non-contacting loop controls contains our state-of-the-art new CB-5501M main control board. This new board has all the features of the previous generation CB-5101M board, such as on-board storage for up to 8 preset programs and remote access to 3 presets, plus virtually instantaneous push-button calibration that lets you set your unit up in seconds, USB compatibility for remote set-up, and a program-locking jumper. Best of all, the new board is completely backwards compatible, making it easy and affordable to update your current system by simply buying a replacement board.

For more information on our products, including our full line of non-contacting loop control systems, please visit our main site. If you would like to ask us a question or request a quote, please contact us.

 

CS-5000-54XX

The standard Coiltek loop control model, the CS-5000, comes in three different stand heights. Last time I discussed the benefits of the CS-5000-15XX, which comes with a 15″ tall stand and a customer-dictated boom length (represented by the XX in the name). This time, we will talk about the next size up, the CS-5000-54XX.

The CS-5000-54XX, as the name suggests, features a 54″ tall stand and a variable boom length, which is dictated by customer need. If, for instance, you need to position your loop control further away from the line or have wide stock, choose a longer boom. If you want your stand closer to your line, choose a shorter boom. When ordering a stand, the XX in the part number can be replaced by the chosen boom length. You can choose between many boom lengths, from 11″ to 48″. The most popular combination boom length for the 54″ tall stand is the 11″ boom, otherwise known as a CS-5000-5411.

The CS-5000-54XX can be used over pits, if necessary, and with a variety of different materials, from steel to plastic tubing. This reliable, adaptable system can also be used with a world of accessories to enhance its performance, such as the CTAC-2 sound isolation cone, the Hammerhead multiple transducer assembly, and the 3CPO, which grants remote access to 3 preset programs.

For more information on any of our products, including the entire CS-5000 series, please visit our main website, check out our brochures, and of course, don’t hesitate to contact us.